Description
| | |
|---|
| Diameter "D" | Flange* Diameter "FD" | Minimum Length "L" |
| .115 | .187 | .312 |
| .125 | .187 | .312 |
| .141 | .218 | .312 |
| .156 | .250 | .312 |
| .161 | .250 | .375 |
| .187 | .250 | .500 |
| .215 | .312 | .625 |
| .250 | .312 | .625 |
| .274 | .375 | .750 |
| .312 | .375 | .750 |
| .375 | .437 | .750 |
* Approximate values
Contact us if you have a special requirement.
Material
| | |
|---|
| Low Carbon Steel | Stainless Steel |
| Material: | C1008-C1020 C-0.23% Max; P-0.04% Max Mn-0.90% Max; S-0.05% Max | 18-8 302Hq/304/304L Standard |
| Mechanical Properties: | Min. Tensile Type A .....61,000 Psi (420 Mpa) Min. Yield Type A .....49,000 Psi (340 Mpa) | Other Grades Available Upon Request |
| Plating: | Copper Plating Is Standard | Plating Does Not Apply To Stainless Steel |
| Annealing: | | Studs Are Annealed Where Required |
| Aluminum: | 1100, 6061 And 5000 Series | Brass Alloy - Lead Free 70-30 In Standard |
