Description
| | |
---|
Diameter "D" | Flange* Diameter "FD" | Minimum Length "L" |
.115 | .156 | .312 |
.125 | .156 | .312 |
.141 | .195 | .312 |
.156 | .221 | .312 |
.161 | .221 | .375 |
.187 | .221 | .500 |
.215 | .281 | .625 |
.250 | .281 | .625 |
.274 | .343 | .750 |
.312 | .343 | .750 |
.375 | .418 | .750 |
* Approximate values
Contact us if you have a special requirement.
Material
| | |
---|
| Low Carbon Steel | Stainless Steel |
Material: | C1008-C1020 C-0.23% Max; P-0.04% Max Mn-0.90% Max; S-0.05% Max | 18-8 302Hq/304/304L Standard |
Mechanical Properties: | Min. Tensile Type A .....61,000 Psi (420 Mpa) Min. Yield Type A .....49,000 Psi (340 Mpa) | Other Grades Available Upon Request |
Plating: | Copper Plating Is Standard | Plating Does Not Apply To Stainless Steel |
Annealing: | | Studs Are Annealed Where Required |
Aluminum: | 1100, 6061 And 5000 Series | Brass Alloy - Lead Free 70-30 In Standard |