Description
| | |
|---|
| Imperial Thread "D" | Flange* Diameter "FD" | Minimum Length "L" |
| 4-40 | .143 | .312 |
| 6-32 | .169 | .312 |
| 8-32 | .195 | .312 |
| 10-32 | .221 | .312 |
| 10-24 | .221 | .312 |
| 1/4-20 | .281 | .375 |
| 5/16-18 | .342 | .500 |
| 3/8-16 | .418 | .625 |
* Approximate values
Contact us if you have a special requirement.
| | |
|---|
| Metric Thread "D" | Flange* Diameter "FD" | Minimum Length "L" |
| M3-0.5 | 3.76 | 6 |
| M4-.07 | 4.75 | 8 |
| M5-.08 | 5.75 | 8 |
| M6-1.0 | 6.78 | 10 |
| M8-1.25 | 8.74 | 10 |
| M10-1.50 | 10.8 | 16 |
* Approximate values
Contact us if you have a special requirement.
Material
| | |
|---|
| Low Carbon Steel | Stainless Steel |
| Material: | C1008-C1020 C-0.23% Max; P-0.04% Max Mn-0.90% Max; S-0.05% Max | 18-8 302Hq/304/304L Standard |
| Mechanical Properties: | Min. Tensile Type A .....61,000 Psi (420 Mpa) Min. Yield Type A .....49,000 Psi (340 Mpa) | Other Grades Available Upon Request |
| Plating: | Copper Plating Is Standard | Plating Does Not Apply To Stainless Steel |
| Annealing: | | Studs Are Annealed Where Required |
| Aluminum: | 1100, 6061 And 5000 Series | Brass Alloy - Lead Free 70-30 In Standard |
