Description
| | |
---|
Imperial Thread "D" | Flange* Diameter "FD" | Minimum Length "L" |
4-40 | .111 | .312 |
6-32 | .137 | .312 |
8-32 | .163 | .312 |
10-32 | .189 | .312 |
10-24 | .189 | .312 |
1/4-20 | .245 | .375 |
5/16-18 | .311 | .500 |
3/8-16 | .374 | .625 |
* Approximate values
Contact us if you have a special requirement.
| | |
---|
Metric Thread "D" | Flange* Diameter "FD" | Minimum Length "L" |
M3-0.5 | 2.98 | 6 |
M4-.07 | 3.98 | 8 |
M5-.08 | 4.98 | 8 |
M6-1.0 | 5.97 | 10 |
M8-1.25 | 7.97 | 10 |
M10-1.50 | 9.96 | 16 |
* Approximate values
Contact us if you have a special requirement.
Material
| | |
---|
| Low Carbon Steel | Stainless Steel |
Material: | C1008-C1020 C-0.23% Max; P-0.04% Max Mn-0.90% Max; S-0.05% Max | 18-8 302Hq/304/304L Standard |
Mechanical Properties: | Min. Tensile Type A .....61,000 Psi (420 Mpa) Min. Yield Type A .....49,000 Psi (340 Mpa) | Other Grades Available Upon Request |
Plating: | Copper Plating Is Standard | Plating Does Not Apply To Stainless Steel |
Annealing: | | Studs Are Annealed Where Required |
Aluminum: | 1100, 6061 And 5000 Series | Brass Alloy - Lead Free 70-30 In Standard |